News

Various amusement facilities products

pd_sl_02

Introduction to bumper cars

A bumper car is an amusement game facility that includes a bumper car vehicle and an indoor venue. There is an electrified power grid on the ceiling. There are small electric collision cars for passengers to drive in the venue. The bumper car is surrounded by an apron made of rubber and powered by a vertical pole connected to the ceiling. A car usually seats up to two people, with pedals for acceleration and a steering wheel for steering. The collision car body is generally made of fiberglass demolding. The reinforcing material in fiberglass is fiberglass. Glass fiber is an inorganic fiber material drawn or blown from molten glass. Its main chemical components are silicon dioxide, aluminum oxide, boron oxide, magnesium oxide, Sodium oxide, etc.

Grid bumper cars: Grid bumper cars are divided into two types: sky and ground grid bumper cars.

Introduction to bumper cars

Ground grid bumper cars, as the name suggests, are amusement devices that use ground conduction to promote the operation of the bumper cars.

The ground grid collision car is the most popular and powerful new type of “ground grid collision car” both domestically and internationally.  Its two electrodes are powered on the floor, and tourists can drive, charge left, right, rub, and collide with it, making it difficult to prevent and exciting. It is worth mentioning that the ground grid collision car is directly connected to the floor through conductive devices, which may not be very obvious and difficult to recognize, The name of the ground grid bumper car is also derived from it.

Collision cars are divided into two categories: power grid collision cars and battery collision cars.

Introduction to bumper cars

The power supply of the grounding grid collision car is also known as grounding grid type power supply: a power supply network composed of strip and block conductors, which is arranged on a sufficiently large insulating board with several conductive bars. The adjacent conductive bars have opposite polarity, and each conductive bar is connected to the power supply in an appropriate way. These are all carried out on a steel plate called the grounding grid collision car. Therefore, when installing and operating the grounding grid collision car, These connected devices must be very tight in order to fully ensure the normal operation of the collision car. When an object moves freely in the power supply network, it can absorb electrical energy or signals from the power supply network through a sliding contact group. This blocky power supply network can be directly applied to power collision cars in amusement parks. The ground of the collision car activity site using this power supply method is usually covered with steel plates, which serves as the venue for the network collision car activity. This type of ground collision car steel plate can directly use ordinary ground to transmit electricity to the collision car itself, hence the name of the ground collision car.

Introduction to bumper cars

The ground grid bumper car also has its own game rules: the driver of the ground grid bumper car strives to complete the circle within the field as soon as possible, or cross the entire field, which is the main goal. Of course, the main goal is also the companion driven bumper car, or the bumper car driven by other players. Along the way, they can collide with the opponent’s car horizontally and directly. The ground grid bumper car, like the battery bumper car, can automatically set the time. The settings of this system can be completed through remote control. A remote control can control dozens of bumper cars in the field. When the time is up, the operator turns off the power at the end of the game. The speed of a collision car is usually very low, but this type of ground grid collision car is relatively faster. However, because there is a layer of rubber tires around the collision car, even a collision will not damage people and vehicles.

Battery Bumper Car: Made of environmentally friendly fiberglass products in one molding process, the iron parts are electrostatically sprayed with baking paint, equipped with advanced sound, positioning, lighting, timing functions, etc. It uses a 24V battery power supply and is made of imitation animals. The color is bright, not fading, and has the characteristics of environmental protection, corrosion resistance, good stability, aesthetics, novel style, good safety performance, and adaptability to a wide range of venues, It is a popular amusement device in the market and loved by children.


Post time: Jul-15-2023